【free shipping】Multifunctional Expansion Accessory for Outdoor Camping IGT 1-Unit Tabletop

Note: The products sold on this page are IGT special hooks, and do not include other items shown in the picture.

Black (4-piece set - ARBOR only)
No More Dust for Your Original Cassette Stove: Perfectly Compatible with Iwatani CB-ODX1
Expansion Accessory for ARBOR IGT Folding Table

Before You Buy:
Thank you for your interest! Please read the following information carefully to ensure this product meets your needs.

About the Craftsmanship:
This product is made using 3D printing technology with PETG material. Due to 3D printing, there may be layer lines or rough surfaces, which are normal and not defects. Products are carefully selected, but if you have high requirements for appearance, please proceed with caution.

About Product Compatibility:
This accessory is designed specifically for the ARBOR IGT tables and is compatible with the original ARBOR 1-unit tabletop. Ensure your usage scenario matches the product’s characteristics.

Warm Reminder:
This DIY product may have slight variations. If you have high demands for craftsmanship, please purchase with caution. If you have any questions, please contact customer service.

ARBOR IGT Table Extension Accessory User Manual
Thank you for purchasing! Please read this manual carefully for safe and correct usage.

1. Product Introduction:
This extension accessory is designed for ARBOR IGT tables. It is made from PETG material using 3D printing and has a maximum weight capacity of 5 kg (recommended not to exceed 4 kg). It can hold a portable gas stove (Iwatani CB-ODX-1 is recommended) or other items, expanding the table’s usable space.

2. Product List:

• Rectangular clamps x 4
• Round axle hooks x 4
• Concave fasteners x 2

3. Installation Steps:

• Install rectangular clamps: Insert them into the raised positions on the ARBOR IGT table. Ensure they are securely inserted.
• Install round axle hooks: Slot them into the two round grooves on each rectangular clamp.
  Note: The round axle hooks may fall off during installation, but you can attach them to the tableboard first.
• Align rectangular clamps: Ensure they are properly aligned to avoid angle deviation.
• Install the IGT tableboard: Place the board onto the round axle hooks.
  For placing a gas stove, use all 4 clamps and 2 IGT tableboards (only compatible with original ARBOR tableboards).
• Fix concave fasteners: Secure them in the gap between the tableboards for stability.
  If placing the gas stove in the center of the boards, it may affect ignition; move it slightly left for better convenience.

4. Usage Instructions:

• The weight limit is 5 kg; use items not exceeding 4 kg.
• Suitable for boiling water, not large-scale cooking.
• For safety, follow the instructions carefully.
• Using 2 clamps allows simple item placement.
• Using 4 clamps enables stove and additional item placement.
• Ensure the gas stove is centered on the tableboard to prevent excessive heat affecting the clamp’s durability.
• The Iwatani CB-ODX-1 stove is recommended due to its windproof rack minimizing heat exposure. Other stoves have not been tested, so use them cautiously.
• This accessory is only suitable for static use; avoid testing with dynamic force.

5. Product Maintenance:

• Do not scratch with sharp objects.
• Keep away from high temperatures and open flames.
• Clean with a soft damp cloth.

6. Warm Reminder:
Since the product is 3D printed, there will be visible layer lines, and some areas may have imperfections (unavoidable with 3D printing). If you are a perfectionist, please purchase with caution.
For any issues during installation or use, please contact customer service.

7. Disclaimer:
We are not responsible for any damage caused by improper use.